(1x HL-WPP, 1x HL-WPP-4LBD, 1x WPPHPLS, 1x HL-WPP-FSS, 1x HL-WPP-ACP)
And can be further controlled through the use of the included four-piece PAR lens set to provide narrow, medium, wide, and super wide beams.
It features a CRI 94 and has a nominal daylight-balanced correlated color temperature of 5600K, which can be adjusted from 4600-7000K using an on-board dial. Ideal for both still, movie, and stage applications.
This light is also flicker-free, vibration and impact resistant, and the single point source bulb has been tested for a lifespan of 30,000 hours.
This Wasp AC Power Supply from Hive Lighting is a multi-voltage, 90-300 VAC power source for Wasp fixtures.
It is an AC-only supply for one fixture and features an inline on/off switch.
Designed for the Hive Lighting Wasp PLASMA PAR light, the Wasp PAR HDP 4 Lens Set includes narrow, medium, wide, and super wide lenses for controlling the light's beam angle and shape.
These lenses are constructed from holographic diffusing polycarbonate (HDP) and are designed to imitate traditional glass PAR lenses, but have 20% higher transmission and are vibration and shatter resistant.
This Wasp 5-Piece Scrim Set from Hive Lighting allows you to selectively reduce the light intensity of the Wasp PLASMA Light.
The kit contains two single scrims, two double scrims, one 1/2 single scrim, one 1/2 double scrim and a scrim bag. Scrim diameter is 6.5".
The set also fits the Bee light fixture.
The Wasp 4-Leaf Barndoor Set by Hive is compatible with all Wasp lighting fixtures; they attach to the front, and are used to restrict and shape the light.
Additionally, the set can rotate 360 Degree and accepts grids and filters. Wasp PLASMA PAR Light Kit with 15' Header Cable.
Hive’s Plasma lighting is completely flicker free. Plasma is the world’s most reliable high-speed light source. The process of super heating the argon gas in each bulb requires cycles well beyond the frame rates currently possible with any high-speed camera. At 450Mhz, a plasma bulb cycles 450 million times per second, the equivalent of 225 million frames per second before any flicker could be detected. The fastest HMIs are usually cycling at 1000hz, or 450,000 times slower per second; even the fastest LEDs are only at 5000hz.
Hive’s plasma bulbs are electrode-less, filament free and unpressurized with an inert noble gas fill. The result is a vibration, impact and weather resistant lamp. The bulb will maintain high output and color quality for 30,000 hours of operation, and will produce light for 50,000. The electronics are rated for over 100,000 hours in IP65 conditions. While no technology is completely indestructible, plasma bulbs have become the go to choice in many mission critical lighting applications inside and outside the entertainment lighting world.
Just like sunlight plasma is bright. But Plasma is also very efficient, in fact as many as 7 Wasps can be plugged into a single wall socket (US: 120V, 20A). That produces the equivalent amount of light as a 4,000Watt Hmi, but plugged into the wall! The small arc of a plasma bulb allows for extremely efficient optics. This means that the single plasma point source is perfect for any long throw application. If you need light 5 or 500 feet away, plasma’s fall off is much more efficient than any other light source.
Plasma is sunlight. And just like the sun, plasma lights are full spectrum daylight with perfect color rendering. With Hive’s Variable Color Temp or VCT, Hives plasma bulbs can track with the changing color temperature of the sun from 4600K – 7000K while maintaining full spectrum output and a CRI above 98. But the key to Hive’s spectrum is unlike Tungsten with little to no blue or HMIs with no red, plasma’s spectrum like the sun is able to render color equally across the visible spectrum