(2x HL-WPP, 2x HL-WPP-4LBD, 2x HL-WPP-FSS, 2x HL-WPP-HPLS, 2x HL-WPP-2LHC, 1x HL-WPP-KDH, 1x HL-WPP-2ACP)
It uses Hive’s Wasp PLASMA Par optics but combines two lights in one housing, making it the most versatile in Hive’s line.
A single Killer can be used as a double Par, giving you 2X more light. It’s as bright as a 1.2K HMI, but only draws 540 watts.
Even spectrum 5600 CCT daylight balanced light with a CRI 94.
A single Killer can be used as a double Par, giving you 2 times more light.
It is as bright as a 1.2K HMI, but only draws 560 wattsTwo individual Killer units can be combined using a frame to make 2×2 arrays.
These 2×2 arrays can be used as a 4 light Maxi which is as bright as a 2.5K HMI, or hung with a 6K Spacelight bag to make a Maxi Spacelight that is brighter than a 6,000W Tungsten Maxi-Spacelight, but only draws 1,120 watts.
Toggle switches provide individual on/off lamp control.
For different beam spreads and orientation, standard 8" Par lenses can be easily changed with snap rings.
Hive lights use 50% to 90% less energy than conventional studio fixtures.
Their simple, rugged design makes them suitable for all types of production, whether on stages, studios or at remote locations.
All of Hive’s lamps use a single point PLASMA source that lasts 10,000+ hours, are flicker-free, universal orientation, and produce full, even spectrum 5600 CCT daylight balanced light with a CRI of 94. Hive lights save energy without sacrificing light output or color quality.
Hive’s Plasma lighting is completely flicker free. Plasma is the world’s most reliable high-speed light source. The process of super heating the argon gas in each bulb requires cycles well beyond the frame rates currently possible with any high-speed camera. At 450Mhz, a plasma bulb cycles 450 million times per second, the equivalent of 225 million frames per second before any flicker could be detected. The fastest HMIs are usually cycling at 1000hz, or 450,000 times slower per second; even the fastest LEDs are only at 5000hz.
Hive’s plasma bulbs are electrode-less, filament free and unpressurized with an inert noble gas fill. The result is a vibration, impact and weather resistant lamp. The bulb will maintain high output and color quality for 30,000 hours of operation, and will produce light for 50,000. The electronics are rated for over 100,000 hours in IP65 conditions. While no technology is completely indestructible, plasma bulbs have become the go to choice in many mission critical lighting applications inside and outside the entertainment lighting world.
Just like sunlight plasma is bright. But Plasma is also very efficient, in fact as many as 7 Wasps can be plugged into a single wall socket (US: 120V, 20A). That produces the equivalent amount of light as a 4,000Watt Hmi, but plugged into the wall! The small arc of a plasma bulb allows for extremely efficient optics. This means that the single plasma point source is perfect for any long throw application. If you need light 5 or 500 feet away, plasma’s fall off is much more efficient than any other light source.
Plasma is sunlight. And just like the sun, plasma lights are full spectrum daylight with perfect color rendering. With Hive’s Variable Color Temp or VCT, Hives plasma bulbs can track with the changing color temperature of the sun from 4600K – 7000K while maintaining full spectrum output and a CRI above 98. But the key to Hive’s spectrum is unlike Tungsten with little to no blue or HMIs with no red, plasma’s spectrum like the sun is able to render color equally across the visible spectrum