Akurat Lighting D4 MK2 Bi-Color Softlight LED Panel (65W) with DMX and AC Adapter - D4-MK2

Akurat Lighting
AR-D4-MK2
5902596414399 02000
Bestel
  • Beschrijving
  • Meer

Akurat Lighting D4 MK2 Bi-Color Softlight LED Panel (65W) with DMX and AC Adapter

Akurat Lighting D4 MK2
• Photometrics:
90 Degree Softlight
6500K 1800 lux 1m, 550 lux 1.8m, 200 lux 3m
2700K 1500 lux 1m, 460 lux 1.8m, 160 lux 3m
• Adjustable colortemperature: 2700K-6500K
• AC-adapter
• Beam Angle: 90 Degree
• CRI 97 / TLCI 99
• Flicker Free
• Dimming 0% - 100%
• Nominal voltage 12-18 V
• Max power 65/60W
• Power source AC 90-264V
• Remote control DMX, W-DMX (optional)
• Dimensions: 465mm (w) x 370mm (h) x 43m (d)
• Weight 3,7 kg
• Body: aluminium
• Passive cooled

• Available accessories:
Barndoors
Honeycomb
V-Lock adapter
Bag
DoPchoice Snapbag
DoPchoice SnapGrid
Akurat Lighting D4 MK2 high output softlight LED panel for Filmmakers, Phototograpgers, Musea, Studios and Videomakers.
Akurat Lighting D4 MK2 is another incarnation of the smallest panel of Akurat D-SOFT series, a panel made of aluminum with dimensions of 30×26 cm. The fixture is now more powerful and has a much greater light output .

The CCT range has been extended to the 2700-6500 Kelvins. The Mark 2 also features a completely new light control by the multifunction encoder knob.

Many accessories are available including barndoors, grids, battery plates, communication modules.

• Basic parameters:
Maximum luminous flux approx. 6000 lumens
Maximum illuminance up to 1800 lux @ 1m
CRI Ra=97+ TLCI 99-100
Maximum electric power – 65W

The excellent photometric parameters of the D-SOFT series are due to the use of advanced materials to build the optical system of the fixtures. It consists of a very high transmittance diffusion foil in front of the LEDs and a low-loss high diffusion reflector placed under the LEDs. The combination of these materials allows for beautiful soft light with high intensity.

Thanks to the use of modern multichip and multi-phosphor LEDs with high CRI and TLCI and very efficient converters powering the LEDs, it was possible to increase the lamp power and obtain a strong stream of high-quality soft light, completely free of the flickering.

New LEDs enable a wider CCT range, from 2700 to 6500K.

A modern controller with an LCD display allows you to set light parameters using a convenient knob. The controls are simple and intuitive, allowing the operator to concentrate on the job.

All MK2 panels, unlike previous versions, are factory-equipped with a DMX decoder. It is also possible to control the lamp wirelessly, using dedicated W-DMX communication modules.