Bestel
  • Beschrijving
  • Meer

Kino Flo Block / KF21 Double Battery System, 140Whr, 28.8V (2x Battery) (Block/F21 Double Fast Charger with Universal Pws, Block/F21 Mafer Mount 28.8V, 3-pin XLR, 3 FT)

• WHR: 140WHR, 5.0A @ 28VDC
• Dimensions: 6" x 4.5" x 3" (15 x 11 x 8cm)
• Weight: 4.5 lb (2.0kg)
• Type: NiMH

Note: BAT-KF21 is unrestricted for air and ground transport
The KF21 battery can power 28.8V (20-34VDC) applications. Run time for Kino Flo products listed above is approximately 1 hour and 10 minutes at full brightness. When fixtures are dimmed, the battery will last longer.
Kino Flo Lighting Systems partners with BlockBattery for newly introduced KF21 (NiMH) battery systems for its LED line.
The Kino Flo/BlockBattery systems are designed to work with the following Kino Flo LED products with DC capability:

Celeb 250 LED DMX
Diva-Lite 20 & 30 LED DMX
Diva-Lite 21 LED DMX
Diva-Lite 31 LED DMX

FreeStyle 21 & FreeStyle/GT 21 LED DMX
FreeStyle 31 & FreeStyle/GT 31 LED DMX
FreeStyle 41 & FreeStyle/GT 41 LED DMX

Select 20 & 30 LED DMX

Charge time is only 1.5 hours versus Lithium batteries that take approximately 4 hours to fully charge. Unlike lithium batteries, the Kino Flo/BlockBattery is also travel friendly with no travel restrictions BlockBattery Travel Documentation.

In addition to powering 28.8V, battery adapters may be used to access 14.4V to be used with products with 14.4V input. It’s like having two batteries for the price of one!

The Single Channel Fast Charger utilizes BlockBattery’s advanced microprocessor system and multi-level charge routines to quickly & safely, qualify, initiate and terminate charging of a nickel metal-hydride (NiMH) battery. It is designed to charge one Kino Flo/BlockBattery, BAT-KF21.

The Charger System, BAT-BC1U, includes a Single Fast Charger and universal power supply, 120W/48V with 3-Pin xlr. Charge time is 1.5 hours. Charge cycle is complete when all 3 LED’s are on steady.

Note: For best long-term performance, avoid interrupting charge cycle during fast charge. Avoid “top-off” charging a full battery just before use. This is unnecessary and could elevate the voltage above equipment operating ranges and/or damage equipment being powered.

The Dual Charger System, BAT-BC2, includes a dual fast charger and Universal powersupply, 280W/48V with 3-pin xlr. Dual Charger will charge 2 batteries in 1.5 hours.